高强度堵水剂裂缝细管模型堵水模拟实验

在裂缝性致密储层中，裂缝既是油流通道又是水驱窜流通道，在注水开发中由于裂缝的存在导致水驱波及效率低，从而形成无效注水开发。此外，裂缝性储层的封堵又存在大裂缝封堵效果差、有效期短等问题。鉴于此研制了水溶性酚醛树脂冻胶和单体地层聚合高强度堵剂体系，测定了堵剂在70℃下的成胶性能、稳定性以及封堵强度等。通过细管模拟裂缝研究了不同因素对堵剂突破压力的影响；通过可视化细管研究了堵剂在管中的突破方式以及影响因素。研究结果表明，水溶性酚醛树脂冻胶的突破压力随着冻胶强度的增加而增加，随着管径的增加而减小，随着注水速度的增加先减小、后增加，最后稳定；单体地层聚合堵剂的突破压力随着堵剂强度的增加而增加，随着管径的增加先增大、后减小。在可视化细管实验中，堵剂突破时并不完全沿细管中心突破，其堵剂的强度与黏附性等因素有关。     

Transverse magnetoresistance peculiarities of thermoelectric Lu-doped Bi2Te3 compound due to strong electrical disorder

The n-type thermoelectric Bi_1.9Lu_0.1Te₃ was prepared by microwave-solvothermal method and spark plasma sintering. The magnetic field and temperature dependences of transverse magnetoresistance measured within temperature 2–200 K interval allow finding the peculiarities characteristic for strongly disordered and inhomogeneous semiconductors. The first peculiarity is due to appearance of linear-in-magnetic field contribution to the total magnetoresistance reflected in a crossover from quadratic magnetoresistance at low magnetic fields to linear magnetoresistance at high magnetic fields. The linear magnetoresistance can result from the Hall resistance picked up from macroscopically distorted current paths due to local variations in stoichiometry of the compound studied. The second peculiarity is that both linear magnetoresistance magnitude and crossover field are functions of carrier mobility which is in agreement with the Parish and Littlewood model developed for disordered and inhomogeneous semiconductors. An increase in the mobility due to a decrease in temperature is accompanied by an increase in the magnetoresistance magnitude and a decrease in the crossover field. Finally, the third peculiarity is related to the remarkable deviation of the total magnetoresistance measured at various temperatures from the Kohler's rule. Presence of strong inhomogeneity and disorder in the Bi_1.9Lu_0.1Te₃ structure concluded from the magnetoresistance peculiarities can be responsible for the remarkable reduction in the total thermal conductivity of this compound.     

The effects of porosity,asphalt content and fiberglass incorporation on the tensile strength and resilient modulus of asphalt concrete blends

Asphalt concrete is the prevailing material used for road surface construction. Its adequate characteristics in providing stability, durability and driving safety are controlled by complex interactions between its components. Thus, it is important to estimate the sensitivity of asphalt concrete mechanical properties as a function of its volumetrics. For this study, different combinations between asphalt content (3.5, 5 and 7.5%) and porosity values (above 4%) were used in order to disassociate these properties. The influence of mixing in fiberglass (0.5%) was also analyzed. It was found that porosity is significantly more relevant than the asphalt content in the prediction of tensile strength and resilient modulus of fiber-free asphalt concretes. In fiber-reinforced mixtures, the mechanical properties are improved by increasing the asphalt content, which suggests a better bonding between fibers and aggregates. For both cases, decreasing porosity is beneficial. By grouping both sets of results, it was possible to create a unique theoretical curve for both the tensile strength (q_t) and the resilient modulus (RM). The RM/q_t ratio was 5800 for the fiber-free group, and 3900 for the fiber-reinforced group - suggesting a better fatigue life indicator for asphalt concretes when fibers are added.     

Design and validation of robotic bionic eye with multiple flexible ropes parallel mechanism inspired by oculomotor law

Producing a stable and agile bionic eye for visual image acquisition in robotics is a challenging task. In this paper, we design a bionic eye with mirror-symmetric distribution and cross-connection of flexible ropes. This mechanism is based on oculomotor law and the physiological structure of the extraocular muscles (EOMs). Specifically, the basic structural parameters are determined by Listing’s law, and the unique connection of the flexible ropes can realize the functions of the recti and oblique muscles. Furthermore, to mimic the trochlea structure, a pulley mechanism is constructed to permit the free movement of the flexible ropes. Through simulation and physical experiments, it is demonstrated that the bionic eye mechanism can move with agility under the structural parameters. The experimental results indicate that the proposed bionic eye mechanism has a superior motion accuracy of 2.798 mm, which is 6.7% of the maximum motion distance, and the repeatable accuracy of the mechanism can up to 0.210 mm.     

Low voltage operating organic light emitting transistors with efficient charge blocking layer

Charge injection/blocking layers play important roles in the performances of organic electronic devices. Their incorporation into organic light emitting transistors has been limitted, due to generally high operating voltages (above 60 V) of these devices. In this work, two hole blocking molecules are integrated into tris-(8-hydroxyquinoline) aluminum (Alq₃) based light emitting transistors under operating voltage as low as 5 V. The effects of hole blocking and electron injection are decoupled through the differences in the energy levels. Significantly improved optical performance is achieved with the molecule of suitable energy level for electron injection. Surprisingly, a decreased performance is observed in the case of another hole blocking molecule evidencing that charge injection overweighs charge blocking in this device architecture.     

Diffusion Magnetic Resonance Imaging-Based Biomarkers for Neurodegenerative Diseases

There has been an increasing prevalence of neurodegenerative diseases with the rapid increase in aging societies worldwide. Biomarkers that can be used to detect pathological changes before the development of severe neuronal loss and consequently facilitate early intervention with disease-modifying therapeutic modalities are therefore urgently needed. Diffusion magnetic resonance imaging (MRI) is a promising tool that can be used to infer microstructural characteristics of the brain, such as microstructural integrity and complexity, as well as axonal density, order, and myelination, through the utilization of water molecules that are diffused within the tissue, with displacement at the micron scale. Diffusion tensor imaging is the most commonly used diffusion MRI technique to assess the pathophysiology of neurodegenerative diseases. However, diffusion tensor imaging has several limitations, and new technologies, including neurite orientation dispersion and density imaging, diffusion kurtosis imaging, and free-water imaging, have been recently developed as approaches to overcome these constraints. This review provides an overview of these technologies and their potential as biomarkers for the early diagnosis and disease progression of major neurodegenerative diseases.     

Organofluorine Hydrazone Derivatives as Multifunctional Anti-Alzheimer's Agents with CK2 Inhibitory and Antioxidant Features

A set of novel hydrazone derivatives were synthesized and analyzed for their biological activities. The compounds were tested for their inhibitory effect on the phosphorylating activity of the protein kinase CK2, and their antioxidant activity was also determined in three commonly used assays. The hydrazones were evaluated for their radical scavenging against the DPPH, ABTS and peroxyl radicals. Several compounds have been identified as good antioxidants as well as potent protein kinase CK2 inhibitors. Most hydrazones containing a 4-N(CH₃)₂ residue or perfluorinated phenyl rings showed high activity in the radical-scavenging assays and possess nanomolar IC₅₀ values in the kinase assays.     

Neuroprotective and Anti-Inflammatory Effects of Evernic Acid in an MPTP-Induced Parkinson’s Disease Model

Oxidative stress, mitochondrial dysfunction, and neuroinflammation are strongly associated with the pathogenesis of Parkinson’s disease (PD), which suggests that anti-oxidative and anti-inflammatory compounds might provide an alternative treatment for PD. Here, we evaluated the neuroprotective effects of evernic aid (EA), which was screened from a lichen library provided by the Korean Lichen Research Institute at Sunchon National University. EA is a secondary metabolite generated by lichens, including Ramalina, Evernia, and Hypogymnia, and several studies have described its anticancer, antifungal, and antimicrobial effects. However, the neuroprotective effects of EA have not been studied. We found that EA protected primary cultured neurons against 1-methyl-4-phenylpyridium (MPP⁺)-induced cell death, mitochondrial dysfunction, and oxidative stress, and effectively reduced MPP⁺-induced astroglial activation by inhibiting the NF-κB pathway. In vivo, EA ameliorated MPTP-induced motor dysfunction, dopaminergic neuronal loss, and neuroinflammation in the nigrostriatal pathway in C57BL/6 mice. Taken together, our findings demonstrate that EA has neuroprotective and anti-inflammatory effects in PD models and suggest that EA is a potential therapeutic candidate for PD.     

Investigation of the piezoelectric and anti-reduction properties of (Ba,Ca) (Ti,Sn, Hf) textured ceramics prepared under low oxygen partial pressure conditions at low sintering temperatures

Multilayer piezoelectric ceramics must be sintered in a reducing atmosphere, preventing oxidation of the inner base metal. Plate-like textured (Ba, Ca)(Ti, Sn, Hf)O₃ ceramics with a <001> preferred orientation were successfully developed at a low oxygen partial pressure (PO₂:10^?8 atm) using a BaTiO₃ (BT) template with sintering temperatures < 1300 °C, which is beneficial for multilayer applications using base metal co-firing with ceramics. When adding the 3 wt% BT template, the proposed samples had a Lottgering factor of 84 %, piezoelectric coefficients d₃₃ = 324 pC/N, -d₃₁ = 122 (pC/N), and Q_m = 452, and the strain values increased from 0.07 % for the randomly oriented ceramics to 0.115 % at 20 kV/cm for the textured ceramics, confirming that the texturing behavior assisted the grain growth and improved both the soft and hard behaviors and insulation resistance of the proposed lead-free ceramics. These findings make a significant contribution to the production of high-power piezoelectric components.